AT Aluminum Racing Radiator High Performance Radiator for I 35 2009-2012

AT Aluminum Racing Radiator High Performance Radiator for I 35 2009-2012

1. Specifications

2. Ten Ways to Install a New Radiator

Step 1: Disconnect the battery so any electric cooling fans won't suddenly get activated when you're working. also, don't forget to remove the entire assembly.

Step 2: Disconnect the radiator hoses and drain the radiator fluid. To do these, loosen the hose clamps first.

Step 3: The transmission cooling lines have to be disconnected as well and to do that, you'll need an open race wrench.

Step 4: Remove all the clamps and screws before lifting the old and damaged radiator.

Step 5: Get the new radiator and slide it into place.

Step 6: Reconnect any clamps or screws that you've removed during the removal process.

Step 7: Replace the fan shroud that you've removed.

Step 8: Reconnect all the electrical connections.

Step 9: All plastic covers should be replaced.

Step 10: Check for leaks. The main about radiator replacement is that there are just so many things pieces that you'd have to connect and reconnect that it's no longer surprising that leaks happen after the installation.

3. The Pictuers 

4. Product Details

1. Structure: Aluminum Core, Plastic Tank, Machine joint radiator
2. Material:High grade Aluminum,the tube is Excellent Air tightness and core pressure Resistance.
3. High heat transfer ,superior corrosion and humidity Resistance.